https://www.phoenixcontact.com/gb/products/3029952
Test disconnect terminal block - SRTK 6 - 3029952
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Test disconnect terminal block, connection method: Spring-cage connection, cross section: 0.2 mm² - 10
mm² , AWG: 24 - 10, width: 8.2 mm, color: gray
Your advantages
Easy and clear operation
Key Commercial Data
Packing unit
50 pc
GTIN
GTIN
4046356169981
Weight per Piece (excluding packing)
34.260 g
Custom tariff number
85369010
Country of origin
Poland
Technical data
General
Number of levels
1
Number of connections
2
Potentials
1
Nominal cross section
6 mm²
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
6 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
1.31 W
02/27/2020 Page 1 / 18
https://www.phoenixcontact.com/gb/products/3029952
Test disconnect terminal block - SRTK 6 - 3029952
Technical data
General
Ambient temperature (operation)
-60 ... 85 ()
Ambient temperature (storage/transport)
-25 ... 55
Ambient temperature (assembly)
-5 ... 70
Ambient temperature (actuation)
-5 ... 70
Maximum load current
45 A (with 10 mm² conductor cross section)
Nominal current IN
41 A
Nominal voltage UN
400 V
Open side panel
Yes
Shock protection test specification
IEC 60529:2001-02
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of surge voltage test
Test passed
Surge voltage test setpoint
7.3 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Result of the test for mechanical stability of terminal points (5 x
conductor connection)
Test passed
Result of bending test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Bending test conductor cross section/weight
1 mm² / 0.4 kg
6 mm² / 1.4 kg
10 mm² / 2 kg
Tensile test result
Test passed
Conductor cross section tensile test
1 mm²
Tractive force setpoint
35 N
Conductor cross section tensile test
6 mm²
Tractive force setpoint
80 N
Conductor cross section tensile test
10 mm²
Tractive force setpoint
90 N
Result of tight fit on support
Test passed
Tight fit on carrier
NS 32/NS 35
Setpoint
5N
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 6,4 mV
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
6 mm²
Short-time current
0.72 kA
Conductor cross section short circuit testing
10 mm²
Short-time current
1.2 kA
02/27/2020 Page 2 / 18
https://www.phoenixcontact.com/gb/products/3029952
Test disconnect terminal block - SRTK 6 - 3029952
Technical data
General
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 1, class B, body mounted
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
1.857 (m/s ) /Hz
Acceleration
0,8 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
5g
Shock duration
30 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE
0304-21))
130 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
2 2
Dimensions
Width
8.2 mm
End cover width
2 mm
Length
113 mm
02/27/2020 Page 3 / 18
https://www.phoenixcontact.com/gb/products/3029952
Test disconnect terminal block - SRTK 6 - 3029952
Technical data
Dimensions
Height NS 35/7,5
49 mm
Height NS 35/15
56.5 mm
Connection data
Connection
1 level
Connection method
Spring-cage connection
Stripping length
12 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
10 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
8
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
6 mm²
Min. AWG conductor cross section, flexible
24
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN
ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN
ferrules, with plastic sleeve, maximum
1.5 mm²
Internal cylindrical gage
A4
Standards and Regulations
Connection in acc. with standard
CUL
IEC 60947-7-1
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
02/27/2020 Page 4 / 18
https://www.phoenixcontact.com/gb/products/3029952
Test disconnect terminal block - SRTK 6 - 3029952
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0
27141100
eCl@ss 4.1
27141100
eCl@ss 5.0
27141100
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141126
eCl@ss 8.0
27141126
eCl@ss 9.0
27141126
ETIM
ETIM 2.0
EC000902
ETIM 3.0
EC000902
ETIM 4.0
EC000902
ETIM 5.0
EC000902
ETIM 6.0
EC000902
ETIM 7.0
EC000902
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Approvals
Approvals
02/27/2020 Page 5 / 18
https://www.phoenixcontact.com/gb/products/3029952
Test disconnect terminal block - SRTK 6 - 3029952
Approvals
Approvals
UL Recognized / cUL Recognized / EAC / EAC / cULus Recognized
Ex Approvals
Approval details
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
Nominal voltage UN
300 V
300 V
Nominal current IN
40 A
40 A
mm²/AWG/kcmil
18-8
18-8
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
C
Nominal voltage UN
300 V
300 V
Nominal current IN
40 A
40 A
mm²/AWG/kcmil
18-8
18-8
FILE E 60425
FILE E 60425
EAC
EAC-Zulassung
EAC
RU CDE.BL08.B.00644
cULus Recognized
Accessories
Accessories
DIN rail
02/27/2020 Page 6 / 18
https://www.phoenixcontact.com/gb/products/3029952
Test disconnect terminal block - SRTK 6 - 3029952
Accessories
DIN rail perforated - NS 32 PERF 2000MM - 1201002
DIN rail perforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated
with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 32 UNPERF 2000MM - 1201015
DIN rail, unperforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
02/27/2020 Page 7 / 18
https://www.phoenixcontact.com/gb/products/3029952
Test disconnect terminal block - SRTK 6 - 3029952
Accessories
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
02/27/2020 Page 8 / 18
https://www.phoenixcontact.com/gb/products/3029952
Test disconnect terminal block - SRTK 6 - 3029952
Accessories
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: silver
02/27/2020 Page 9 / 18
https://www.phoenixcontact.com/gb/products/3029952
Test disconnect terminal block - SRTK 6 - 3029952
Accessories
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper,
uncoated, length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
02/27/2020 Page 10 / 18
https://www.phoenixcontact.com/gb/products/3029952
Test disconnect terminal block - SRTK 6 - 3029952
Accessories
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color:
gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End cover
End cover - D-SRTK 6 - 3029981
End cover, length: 113 mm, width: 2 mm, height: 44.5 mm, color: gray
Labeled terminal marker
02/27/2020 Page 11 / 18
https://www.phoenixcontact.com/gb/products/3029952
Test disconnect terminal block - SRTK 6 - 3029952
Accessories
Zack marker strip - ZB 8 CUS - 0825011
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual
labels: 10
Marker for terminal blocks - UC-TM 8 CUS - 0824597
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting
type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of
individual labels: 56
Marker for terminal blocks - UCT-TM 8 CUS - 0829616
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting
type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of
individual labels: 42
Zack marker strip - ZB 8,LGS:FORTL.ZAHLEN - 1052015
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width:
8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10
Zack marker strip - ZB 8,QR:FORTL.ZAHLEN - 1052028
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width:
8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10
02/27/2020 Page 12 / 18
https://www.phoenixcontact.com/gb/products/3029952
Test disconnect terminal block - SRTK 6 - 3029952
Accessories
Marker for terminal blocks - ZB 8,LGS:L1-N,PE - 1052413
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N,
PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field
size: 10.5 x 8.15 mm, Number of individual labels: 10
Partition plate
Separating plate - TS-UT 6-T/SP - 3072821
Separating plate, length: 105.2 mm, width: 1 mm, height: 67.5 mm, color: gray
Screw bridge
Fixed bridge - FBRI 10-8 N - 2772080
Fixed bridge, pitch: 8.2 mm, number of positions: 10, color: silver
Screwdriver tools
Screwdriver - SZF 2-0,8X4,0 - 1204520
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.8 x 4.0 x 100 mm, 2component grip, with non-slip grip
Short-circuit connector
Short-circuit connector - KSSI 2-8 - 3000722
Short-circuit connector, pitch: 8 mm, length: 11 mm, width: 16.2 mm, number of positions: 2, color: black
02/27/2020 Page 13 / 18
https://www.phoenixcontact.com/gb/products/3029952
Test disconnect terminal block - SRTK 6 - 3029952
Accessories
Short-circuit connector - KSSI 4-8 - 3000735
Short-circuit connector, pitch: 8 mm, number of positions: 4, color: black
Short-circuit connector - KSSI 2-8 - 3000722
Short-circuit connector, pitch: 8 mm, length: 11 mm, width: 16.2 mm, number of positions: 2, color: black
Short-circuit connector - KSSI 4-8 - 3000735
Short-circuit connector, pitch: 8 mm, number of positions: 4, color: black
Switching jumper
Switching jumper - SB 2-8-T - 3026366
Switching jumper, pitch: 8.2 mm, width: 15.3 mm, number of positions: 2, color: orange
Switching jumper - SB 3-8-T - 3026492
Switching jumper, pitch: 8.2 mm, width: 23.5 mm, number of positions: 3, color: orange
02/27/2020 Page 14 / 18
https://www.phoenixcontact.com/gb/products/3029952
Test disconnect terminal block - SRTK 6 - 3029952
Accessories
Switching jumper - SB 4-8-T - 3026379
Switching jumper, pitch: 8.2 mm, width: 31.7 mm, number of positions: 4, color: orange
Switching jumper - SB 10-8-T - 3026382
Switching jumper, pitch: 8.2 mm, width: 80.9 mm, number of positions: 10, color: orange
Switching jumper - SB 10-8-T SO - 3026395
Switching jumper, pitch: 8.2 mm, number of positions: 10, color: orange
Switching lock
Switching lock - S-URTK/SP - 0311155
Switching lock, length: 12 mm, width: 8.2 mm, color: white
Terminal marking
Zack marker strip - ZB 8:UNBEDRUCKT - 1052002
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of
individual labels: 10
02/27/2020 Page 15 / 18
https://www.phoenixcontact.com/gb/products/3029952
Test disconnect terminal block - SRTK 6 - 3029952
Accessories
Marker for terminal blocks - UC-TM 8 - 0818072
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual labels: 56
Marker for terminal blocks - UCT-TM 8 - 0828740
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field
size: 7.6 x 10.5 mm, Number of individual labels: 42
Test socket
Female test connector - PSBJ-URTK 6 FARBLOS - 3026450
Female test connector, color: transparent
Female test connector - PSBJ-URTK 6 RD - 3026719
Female test connector, color: red
Female test connector - PSBJ-URTK 6 BU - 3026434
Female test connector, color: blue
02/27/2020 Page 16 / 18
https://www.phoenixcontact.com/gb/products/3029952
Test disconnect terminal block - SRTK 6 - 3029952
Accessories
Female test connector - PSBJ-URTK 6 YE - 3026405
Female test connector, color: yellow
Female test connector - PSBJ-URTK 6 GN - 3026418
Female test connector, color: green
Female test connector - PSBJ-URTK 6 VT - 3026421
Female test connector, color: violet
Female test connector - PSBJ-URTK 6 GY - 3026612
Female test connector, color: gray
Female test connector - PSBJ-URTK 6 BK - 3026447
Female test connector, color: black
02/27/2020 Page 17 / 18
https://www.phoenixcontact.com/gb/products/3029952
Test disconnect terminal block - SRTK 6 - 3029952
Accessories
Female test connector - PSBJ-URTK 6 BN - 3026971
Female test connector, color: brown
Female test connector - PSBJ-URTK 6 WH - 3026448
Female test connector, color: white
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
02/27/2020 Page 18 / 18
